Size	Length	Price
38mm Airframe	36" Long	$38.11
38mm Coupler	3" Long	$4.41
38mm Coupler	6" Long	$8.23
38mm Coupler	12" Long	$16.86
38mm Coupler	24" Long	$33.90
54mm Airframe	30" Long	$33.05
54mm Airframe	60" Long	$66.90
54mm Coupler	5" Long	$6.60
54mm Coupler	10" Long	$13.37
54mm Coupler	24" Long	$26.70
3.00" / 76mm Airframe	48" Long	$85.68
3.00" / 76mm Airframe Coupler	6" Long	$11.93
3.00" / 76mm Airframe Coupler	12" Long	$25.82
3.00" / 76mm Airframe Coupler	24" Long	$50.64
3.90" / 98mm Airframe	48" Long	$95.78
3.90" / 98mm Airframe Coupler	8" Long	$17.05
3.90" / 98mm Airframe Coupler	12" Long	$25.51
3.90" / 98mm Airframe Coupler	24" Long	$50.96
6" Tubing	48" Long	$184.83
6" Coupler	16" Long	$68.00

Finally, an easy way to fiberglass your bodytube! The EASYGLAS SOCK is a stretchy sleeve that fits over your airframe to make fiberglassing a breeze. Traditional fiberglassing methods are tricky, and involve wrapping cloth around a tube. The downside of this old approach is that it's time consuming, really messy, frustrating and, worst of all, leaves an overlap ridge that has to be sanded down. In short, it's a royal pain!

Finally there's an easy way to glass your tube - - with the EASYGLAS SOCK.

The EASYGLAS SOCK is not fiberglass, but is made of a material that readily absorbs resin and adds structural strength. We've tried it and it works beautifully. Best of all, it finishes easily. The EASYGLAS SOCK is about as thick as 3 or 4 oz fiberglass cloth. Here's the simple procedure:

1. Slide EASYGLAS SOCK over dry airframe and tie the loose ends with twist-ties.
2. Mix your resin, and apply thoroughly over the EASYGLAS SOCK. Squeegy excess material and rotate tube occasionally while resin cures.
3. Once cured, lightly cut down high spots with sandpaper, then prime with several coats of extra thick filler primer (available at department stores). Be sure to sand between coats of primer.

Finally...lamination for the rest of us!!

For additional strength KEVLAR^® sock (below) can be used underneath the EASYGLAS SOCK.

$1.48 per foot EASYGLAS small diameter
for 4" airframes only. (order 1.5 times length of airframe)

$1.80 per foot EASYGLAS large diameter
for 5.5" to 6.0" airframes. (order twice length of airframe).

$2.12 per foot EASYGLAS EXTRA large diameter
for 7.5" airframes and larger. (order twice length of airframe).

The EASYGLAS SOCK is easy to slide on.	The EASYGLAS SOCK has no overlap ridges to sand, and tightly hugs the tube so there's no need for vacuum bagging. It doesn't get any easier.

---

Gabriel Balik uses easyglas. It's easy!!
Click here for a video demonstration!

---

Dave Rose puts the Kevlar Sock onto a 6" and 7.5" diameter airframe. He used a nosecone to taper on the sock. He then wet it out with fiberglass. A new stretchable KEVLAR® sleeve made of 100% pure Aramid KEVLAR® that slides onto your airframe. Laminating your tube is rewarding. But while fiberglass is easy to work with, KEVLAR® cloth is costly and tricky. NOT ANY MORE! Now reinforcing your tube in KEVLAR® is like putting on your socks. Just slide the AIRFRAME SOCK of KEVLAR® on the tube. Because it’s stretchable - - like your socks - - it conforms to the tube and compresses down to hold in place (vacuum bagging optional but not necessary). And since there’s no seam overlap, there’s no bump to sand. Because KEVLAR® can’t be finish sanded, you’ll still need to cover the AIRFRAME SOCK of KEVLAR® in a thin layer of glass. The AIRFRAME SOCK of KEVLAR® stretches to fit tubes from 3” to 6” diameter. It adds between 1/64” and 1/32” to wall thickness. AIRFRAME SOCK of KEVLAR® $3.51 / FT. (order 1.5 times the length of the tube for up to 4” in diameter, and 2.0 times the length for 6”. E.g., for a 3” diameter tube four feet long, allow six feet of sock. For a 6” tube that is 4 feet long, allow eight feet of sock).

---

Just received the fiberglass cloth. Thanks again. It's very nice stuff. I also liked the looks of that kevlar sock ...Keep up the good work,

Kurt Gugisburg

---

Custom Airframe Cutting Diameter Phenolic Glass Up to 3.9" $1.60 /cut $2.93 /cut 6.0" and Larger $4.80 /cut $7.20 /cut Allow +/- 1/8" for kerf Custom Fin Slots - Cleanest slots in the industry! Length Phenolic Up to 12" $4.80 /slot Up to 18" $6.40 /slot Longer slots...call for pricing. Give length & width, and distance slot starts from bottom of tube.